How do I install the NEMO MINIFLUX OPAL Modular LED System? (NEMO MINIFLUX OPAL Modular LED User Guide)

Answer

manuals.plus

Jan 22, 2025 - 10:08 PM

The NEMO MINIFLUX OPAL Modular LED System is installed using transparent polycarbonate clips that are adjusted according to your needs. Here is a step-by-step guide on how to install the system:

1. Determine the desired location for installation: The MINIFLUX OPAL can be installed indoors or outdoors for cornice, decorative, and accent lighting purposes.

2. Prepare the installation area: Ensure that the surface where you will be installing the system is clean and free from any dust or debris.

3. Mount the aluminum profile: Attach the aluminum profile to the desired surface using appropriate mounting hardware. Make sure it is securely fastened.

4. Insert the LED strip: Place the high-emission LED strip (24V DC) into the aluminum profile. Ensure that it is properly aligned and secured in place.

5. Attach the opal polycarbonate diffuser: Place the opal polycarbonate diffuser over the LED strip to achieve a homogeneous emission of light. Make sure it is properly aligned and securely attached to the aluminum profile.

6. Adjust the transparent polycarbonate clips: Use the transparent polycarbonate clips to adjust the position and alignment of the MINIFLUX OPAL according to your needs. These clips allow for easy customization and flexibility in installation.

7. Connect the power supply: Connect the LED strip to a compatible LED driver (not included) using the provided cable. Ensure that the connections are secure and properly insulated.

8. Test the system: Before finalizing the installation, test the MINIFLUX OPAL by turning on the power supply. Verify that the LED strip is functioning correctly and emitting the desired light.

Please note that this is a general installation guide, and it is always recommended to refer to the official user guide or consult a professional electrician for specific installation instructions and safety precautions.