Answer
Jan 22, 2025 - 09:41 PM
To charge the battery of the HILTI NCR 60 D-22 Dieless 6-Ton crimper Cordless Hydraulic, follow these steps:
1. Before charging the battery, make sure that the contacts on the battery and the contacts on the charger are clean and dry.
2. Use an approved charger to charge the battery. Refer to the operating instructions for the charger for detailed instructions on how to use it.
3. Insert the battery into the charger, ensuring that it is properly aligned and securely inserted.
4. Connect the charger to a power source, following the instructions provided with the charger.
5. The charger will indicate the charging status of the battery. Refer to the charger's operating instructions for information on the specific charging indicators.
6. Allow the battery to charge fully before removing it from the charger. The charging time may vary depending on the battery's state of charge and the charger model.
Note: It is important to use only Hilti Nuron lithium-ion batteries of the B 22 series and Hilti chargers specified for these batteries to ensure safe and optimal charging.
Add New Comment