How do I install and set up the KitchenAid KRSC703 Side-by-Side Refrigerator with Exterior Ice and Water? (KitchenAid KRSC703 Refrigerator Ice and Water User Guide)

Answer

manuals.plus

Jan 22, 2025 - 09:29 PM

To install and set up the KitchenAid KRSC703 Side-by-Side Refrigerator, please follow these steps:

1. Location Requirements: Ensure proper ventilation by allowing for 1/2" (1.27 cm) of space on each side and at the top of the refrigerator. Leave a 2" (5.08 cm) minimum space on each side when installing next to a fixed wall. Allow for 1" (2.54 cm) of space behind the refrigerator. If there is an ice maker, provide extra space for water line connections.

2. Electrical Requirements: Plug the refrigerator into a grounded 3 prong outlet. Do not remove the ground prong or use an adapter or extension cord. Use a separate circuit serving only the refrigerator. The electrical supply should be 115 V, 60 Hz AC, with a 15 A or 20 A fused, grounded connection.

3. Water Supply: Connect the refrigerator to a cold water supply with water pressure between 30 psi and 120 psi (207 kPa and 827 kPa). If unsure about water pressure, consult a licensed plumber.

4. Dimension Guide: Refer to the provided Dimension Guide for specific measurements and clearances required for installation.

5. Temperature Settings: Set the desired temperature for the refrigerator and freezer compartments using the control panel located inside the refrigerator.

6. Water and Ice Dispenser: If the refrigerator has an exterior water and ice dispenser, make sure to connect it to a water supply and follow the instructions in the User Guide for proper use and maintenance.

For more detailed instructions and safety information, please refer to the User Guide and Installation Instructions packed with the product.