User Manual Q&AAnswer
Jan 22, 2025 - 09:28 PM
To install the Niko PM25458 Motion detector Swiss Garde 360 DALI Presence Master A-Comfort AP 24m, follow these steps:
1. Ensure that the electrical lines are de-energized before installation for safety purposes.
2. Install the detector on a stable ceiling. Do not install it in direct cold or hot air flows.
3. Remove the front cover of the detector.
4. Wire the detector according to the instructions provided in item 5 of the manual.
5. Fasten the detector in the flush-mounting box.
6. Configure the device according to item 7 of the manual.
7. Mount the front cover back onto the detector.
Please note that the manual provides additional information and guidelines for wiring, connection of loads, configuration, and troubleshooting. It is recommended to refer to the manual for complete and accurate instructions specific to your installation needs.
Add New Comment