User Manual Q&AAnswer
Jan 22, 2025 - 09:10 PM
To preheat the Bestron AES800STE espresso maker, follow these steps:
1. Remove the detachable water reservoir and open the lid to fill it with water. Make sure the water level does not exceed the "MAX" marking.
2. Place the filter in the filter holder, ensuring that the notch is aligned with the groove. Then insert the filter holder into the machine in the "in" position.
3. Place one or two espresso cups on the drip pan.
4. Connect the machine to a power socket and ensure that the selection button in the middle is in the " " position.
5. Press the ON/OFF switch to turn on the machine. The power indication light will light up red.
6. If the ready-for-use indication light keeps lighting up white, turn the selection button to the " " position. Hot water will run through the filter holder. Return the selection button to the " " position when the espresso cup is filled with hot water.
7. Preheating is now finished, and you can proceed to make your espresso.
Note: Preheating the machine ensures that the coffee taste is not affected by cold parts.
Add New Comment