User Manual Q&AAnswer
Jan 22, 2025 - 08:58 PM
Installation Instructions for CAL-ROYAL SDH2082 Templates:
1. Tools Required:
- Drill
- Screwdriver
- Measuring tape
- Pencil
- Level
2. Spare Parts:
- Template
- Screws
3. Installation Steps:
a. Determine the desired location for the template on the door or frame.
b. Hold the template against the door or frame, ensuring it is level and aligned properly.
c. Use a pencil to mark the xxxx hole locations on the door or frame through the template holes.
d. Remove the template and set it aside.
e. Using a drill, create pilot holes at the marked locations on the door or frame.
f. Align the template holes with the pilot holes and place the template back on the door or frame.
g. Insert screws through the template holes and into the pilot holes.
h. Tighten the screws using a screwdriver until the template is securely attached to the door or frame.
i. Double-check the alignment and levelness of the template.
4. Dimensions:
- The dimensions of the CAL-ROYAL SDH2082 Templates can be found in the product manual or on the packaging. Please refer to the specific dimensions provided for accurate installation.
Note: It is always recommended to consult the product manual or contact CAL-ROYAL SDH2082 Products, Inc. directly for any specific installation concerns or additional information.
Add New Comment