User Manual Q&AAnswer
Jan 22, 2025 - 08:54 PM
To assemble the EGO ST1534 56-Volt Cordless 15 Inches Rear Motor String Trimmer Kit, please follow the steps below:
1. Attach the handle: Align the holes on the handle with the holes on the trimmer head assembly. Insert the screws provided through the holes and tighten them securely using the included wrench.
2. Install the guard: Slide the guard onto the trimmer head assembly until it clicks into place. Ensure that the guard is properly aligned and covers the cutting area.
3. Attach the battery: Insert the fully charged EGO 56-volt lithium-ion battery into the battery compartment on the trimmer handle. Push it in until it clicks and locks into place.
4. Adjust the handle: Loosen the handle adjustment xxxx located on the handle assembly. Adjust the handle to a comfortable position and tighten the xxxx to secure it.
5. Install the cutting line: Open the trimmer head cover by pressing the tabs on the sides. Insert the cutting line into the trimmer head, following the directional arrows on the trimmer head. Make sure the line is properly wound and secured.
6. Close the trimmer head cover: Press the cover down until it clicks into place, ensuring that it is securely closed.
7. Safety precautions: Before using the trimmer, make sure to read and understand all safety instructions provided in the user manual. Wear appropriate safety gear, such as eye protection and closed-toe shoes, during operation.
For more detailed instructions and illustrations, please refer to the EGO ST1534 56-Volt Cordless 15 Inches Rear Motor String Trimmer Kit User Manual, specifically the "Assembly" section.
Add New Comment