User Manual Q&AAnswer
Jan 22, 2025 - 08:49 PM
To install the RISCO Curtain Outdoor Swivel detector on a wall, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Choose a suitable location on the wall where you want to mount the detector. Ensure that it provides an optimal coverage area for the detection range.
2. Use a screwdriver to remove the front cover of the detector by loosening the screws.
3. Attach the wall swivel mount to the back of the detector using the provided screws. Make sure it is securely fastened.
4. Mark the desired position on the wall for mounting the detector. Use a level to ensure it is straight.
5. Drill holes in the wall at the marked positions, and insert wall plugs if necessary.
6. Align the wall swivel mount with the drilled holes and secure it to the wall using screws.
7. Connect the necessary wiring to the detector according to the wiring diagram provided in the manual. Ensure proper insulation and connection.
8. Carefully place the detector onto the wall swivel mount, aligning the xxxx holes on the detector with the screws on the mount.
9. Tighten the screws on the detector to secure it in place.
10. Reattach the front cover of the detector by tightening the screws.
11. Test the detector to ensure it is functioning correctly by following the testing procedures outlined in the manual.
Please note that these instructions are a general guide, and it is essential to refer to the specific instructions provided in the RISCO Curtain Outdoor Swivel Instruction Manual for accurate installation steps and any additional considerations.
Add New Comment