User Manual Q&AAnswer
Jan 22, 2025 - 08:48 PM
To install the slug into the hole on the TRANSGO 700-P Separator Plate, please follow these steps:
1. Place the separator plate on a cement floor or a sturdy surface with the side facing up, as indicated in the instruction manual.
2. Take the slug, which should have been provided with the separator plate, and align it with the hole on the plate.
3. Using a light hammer, gently strike the slug with several good whacks. This will help secure the slug in place.
4. Once you have hit the slug with sufficient force, the installation is complete.
It is important to note that the separator plate should be placed on a cement floor or a similarly solid surface to ensure stability during the installation process. Additionally, make sure to use a light hammer to avoid damaging the plate or the slug.
For further guidance or clarification, please refer to the TRANSGO 700-P Separator Plate Instruction Manual.
Add New Comment