User Manual Q&AAnswer
Jan 22, 2025 - 08:40 PM
Installation of the Dahua 4MP 25X TiOC Network PTZ Camera involves the following steps:
1. Unboxing: Open the package and ensure that all the components are included. The camera package typically includes the camera unit, mounting bracket, screws, power adapter, and user manual.
2. Mounting: Determine the location where you want to install the camera. Ensure that it is within the camera's range and has a stable surface for mounting. Use the provided mounting bracket and screws to securely attach the camera to the desired location.
3. Connection: Connect the camera to a power source using the provided power adapter. Make sure to follow the correct voltage requirements mentioned in the user manual. Additionally, connect the camera to your network using an Ethernet cable or via Wi-Fi, depending on your setup.
4. Configuration: Once the camera is powered on and connected to the network, you can access its settings and configure it according to your requirements. This can be done using the camera's web interface or a dedicated software provided by Dahua.
5. Testing: After the installation and configuration, it is recommended to test the camera's functionality. Check if the camera is capturing clear images, if the PTZ (Pan-Tilt-Zoom) functions are working properly, and if the camera is accessible remotely if required.
For more detailed instructions and illustrations, please refer to the Dahua 4MP 25X TiOC Network PTZ Camera Installation Guide provided in the package.
Add New Comment