User Manual Q&AAnswer
Jan 22, 2025 - 08:34 PM
To assemble the BeakBoss Ferplast Cage for Small Birds Palladio 4, please follow these steps:
1. Start by unpacking all the parts and ensuring that you have all the necessary components listed in the instruction manual.
2. Begin by attaching the four side panels together. Insert the plastic connectors into the pre-drilled holes on the panels, making sure they are securely in place.
3. Take the bottom tray and slide it into the designated slots on the bottom of the cage. Ensure that it fits snugly and is properly aligned.
4. Next, attach the top panel to the assembled sides. Insert the plastic connectors into the corresponding holes on the top panel and secure them tightly.
5. Once the main structure is assembled, you can proceed to attach the accessories such as perches, feeders, and water dispensers. These can be attached to the cage using the provided hooks or clips.
6. Finally, check all the connections and make sure everything is secure. Ensure that the doors open and close smoothly.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instruction manual provided with your BeakBoss Ferplast Cage for Small Birds Palladio 4 for detailed and accurate assembly instructions.
Add New Comment