User Manual Q&AAnswer
Jan 22, 2025 - 08:31 PM
To connect the Polk Audio 107REACSUB React Subwoofer wirelessly to your sound bar, follow these steps:
1. Position your subwoofer: Unpack the subwoofer and power cable. Place the subwoofer along the same wall as the TV, no more than 30 ft (10m) from the sound bar. Connect the power cord to the back of the subwoofer and plug the other end into an AC power outlet.
2. Enter pairing mode on the sound bar: Press and hold the CONNECT button on the back of the sound bar for about four seconds. Then, press and hold the CONNECT button on the back of the subwoofer for about four seconds. Release the button when the light on the back of the subwoofer is solid green. Finally, press and release the CONNECT button on the back of the sound bar to complete pairing.
If you encounter any issues, make sure that the sound bar is powered on and playing audio, turn up the bass using the provided Polk remote, check that the power cable is secure in the back of the subwoofer and wall outlet, and ensure that a solid green light is visible on the back of the subwoofer. If the light is flashing green, you will need to reconnect the subwoofer to the sound bar using the instructions provided.
For more troubleshooting and information, please visit the Polk Audio support website at polkaudio.com/support or contact Polk Audio customer service.
Add New Comment