User Manual Q&AAnswer
Jan 22, 2025 - 08:17 PM
To assemble the GREENCUT GTC1200C Motocultor, follow these steps:
1. Mounting the Lower Handle:
- Insert the lower handle into the holes located on either side of the motor assembly.
- Tighten the screws that hold the lower handle to the motor housing.
2. Mounting the Middle and Upper Handle:
- Slide the cable holder through the intermediate handle.
- Place the top handle over the middle handle and align the holes.
- xxxx in the two bolts and tighten the fixing knobs by hand.
- Hold the cable in the lower handle and center the handle with the cable clip.
Please refer to the instruction manual for detailed diagrams and instructions on the assembly process.
Add New Comment