Answer

Jan 22, 2025 - 09:34 AM
To connect your PowerBass XL-850 8 Speaker System to your TV, you have a few options depending on the available connections on your TV. Here are the steps for each option:
1. Bluetooth Connection:
- Make sure your TV has Bluetooth capability. If not, you will need to use one of the other connection methods.
- Turn on your PowerBass XL-850 8 Speaker System and put it in Bluetooth pairing mode by pressing and holding the Bluetooth/Aux Mode button on the controller until you hear a sequence of tones and see the back lights flashing.
- On your TV, go to the Bluetooth settings and search for the XL-(model) Soundbar signal to pair with your PowerBass XL-850.
- Once paired, you can control the volume and other functions using either the main controller on the soundbar or your connected device.
2. AUX Connection:
- Check if your TV has an AUX output or headphone jack. If it does, you can use a 3.5mm AUX cable to connect the TV's audio output to the AUX input on the PowerBass XL-850.
- Plug one end of the AUX cable into the TV's audio output or headphone jack, and the other end into the AUX input on the soundbar.
- Turn on the soundbar and set it to AUX mode by pressing the Bluetooth/Aux Mode button on the controller.
- Adjust the volume and other settings using the main controller on the soundbar or your TV's remote control.
3. Optical Connection:
- Check if your TV has an optical audio output. If it does, you can use an optical cable to connect the TV to the PowerBass XL-850.
- Plug one end of the optical cable into the TV's optical audio output, and the other end into the optical input on the soundbar.
- Turn on the soundbar and set it to the appropriate input mode (usually Optical or SPDIF) using the main controller on the soundbar.
- Adjust the volume and other settings using the main controller on the soundbar or your TV's remote control.
Please refer to your TV's user manual for specific instructions on how to enable and configure the audio output options.
Add New Comment