User Manual Q&AAnswer
Jan 22, 2025 - 07:19 AM
To install the iBeam TE-BPLTC Behind LIC Plate Cam Active-Park Lines, follow these steps:
1. Begin by removing the license plate bolts and the license plate.
2. Install the camera behind the license plate.
3. Replace the license plate and bolts.
4. Connect the RED wire from the camera to the +12 volt reverse wire.
5. Connect the BLACK wire from the camera to a metal, non-painted surface for ground.
6. Run the video cable through the vehicle, making sure to avoid placing it where it can get pinched or damaged.
7. Attach the YELLOW video RCA to the camera's output and to the reverse camera input of the radio or video display.
8. Make sure to angle the camera down 30 - 40 degrees for proper functionality.
For further assistance with the installation, you can refer to the user guide provided with the product or contact the Tech Support line at 1-800-253-TECH.
Please note that it is important to carefully follow the installation instructions to ensure proper functionality of the camera.
Add New Comment