User Manual Q&AAnswer
Jan 22, 2025 - 07:11 AM
To connect your Optoma EW1610 DLP Projector to your laptop, follow these steps:
1. Ensure that both the projector and your laptop are powered off.
2. Locate the VGA or HDMI port on your laptop. The type of port will depend on your laptop model.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Power on both the projector and your laptop.
7. On your laptop, press the appropriate key combination (usually Fn + F4, Fn + F5, or Fn + F8) to switch the display output to the projector. Refer to your laptop's user manual for the specific key combination.
8. The projector should now display the content from your laptop.
For more detailed instructions and troubleshooting tips, please refer to the Optoma EW1610 DLP Projector User Manual.
Add New Comment