User Manual Q&AAnswer
Jan 22, 2025 - 07:09 AM
To connect your Toshiba TLP-650 LCD Projector to your computer, follow these steps:
1. Ensure that both the projector and the computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Use an appropriate VGA or HDMI cable to connect the corresponding port on your computer to the projector's port.
4. Turn on your computer and the projector.
5. Press the "Input" or "Source" button on the projector's control panel or remote control to select the correct input source (VGA or HDMI) for your computer.
6. On your computer, go to the display settings and configure the projector as an additional display or as the primary display, depending on your preference.
7. Adjust the projector's focus and zoom if necessary to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Toshiba TLP-650 LCD Projector Owner's Manual, specifically the section on "Connecting the Projector to a Computer" (page number may vary).
Add New Comment