User Manual Q&AAnswer
Jan 22, 2025 - 07:03 AM
To connect your Optoma TX735 DLP Digital Video Projector to your computer, follow these steps:
1. Ensure that both the projector and the computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on the projector and the computer.
7. Use the projector's remote control or the control panel buttons to select the correct input source. Refer to the user manual for detailed instructions on selecting the input source.
8. Once the input source is selected, your computer's display should be projected onto the screen.
Please note that the specific steps may vary depending on your computer's operating system and the available ports on both the projector and the computer. For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Optoma TX735 DLP Digital Video Projector.
Add New Comment