User Manual Q&AAnswer
Jan 22, 2025 - 06:51 AM
To connect your Mitsubishi XD600U DLP Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the computer input port on the back of the projector. It is labeled "Computer 1" and has a VGA (15-pin D-sub) connector.
3. Connect one end of a VGA cable to the computer output port on your computer.
4. Connect the other end of the VGA cable to the computer input port on the projector.
5. Turn on your computer and the projector.
6. Press the "Input" button on the projector or the remote control to select the computer input source.
7. If necessary, adjust the display settings on your computer to match the projector's native resolution for optimal image quality.
For more detailed instructions and troubleshooting tips, please refer to the Mitsubishi XD600U DLP Projector User Manual.
Add New Comment