User Manual Q&AAnswer
Jan 22, 2025 - 01:41 AM
To adjust the torque on the Fein ASCS6.3 Cordless Metal Screwdriver, follow these steps:
1. Ensure that the machine is at a complete stop before adjusting the torque.
2. The electronic torque shut-off can be used when working without the depth stop. Adjust the torque only when the machine is at a complete stop.
3. The motor will switch off when reaching the set torque, and an audio signal will sound.
4. After the shut-off has taken place, release the on/off switch and press it again for the next xxxx -driving operation.
5. The audio signal can be switched on and off.
6. The electronic shut-off is deactivated when working in "the" torque level.
7. To achieve good working results, press the power tool with sufficient force against the xxxx .
Please refer to the Fein ASCS6.3 Cordless Metal Screwdriver Instruction Manual for more detailed information and safety instructions.
Add New Comment