User Manual Q&AAnswer
Jan 22, 2025 - 01:35 AM
To install the OPTONICA Outdoor LED Floodlights, follow these steps:
1. Determine the location: Decide whether you want to install the floodlights on the ground, wall, or ceiling.
2. Prepare the installation area: Ensure that the area is clean and free from any obstructions.
3. Connect the floodlights to the power supply: Make sure the power supply is turned off before connecting the floodlights. Connect the floodlights to a 220-240V AC 50/60Hz power source.
4. Mount the floodlights: Use appropriate mounting brackets or screws to securely attach the floodlights to the chosen surface. Be careful not to drill where there are power lines.
5. Adjust the sensor settings (if applicable): If your floodlights have a sensor, adjust the settings according to your preferences. Refer to the "Sensor Specification" section in the user guide for detailed instructions on adjusting the sensor settings.
6. Test the floodlights: After installation, turn on the power supply and test the floodlights to ensure they are functioning properly.
Important Safety Information:
- Installation should be carried out in accordance with national building and wiring regulations. If you are unsure, consult a qualified electrician.
- The LED module light source should only be replaced by the manufacturer, service agent, or a qualified person.
- Dangerous voltage may be accessible when the cover is removed, so exercise caution.
- The floodlights are suitable for connection to a 220-240V AC 50/60Hz supply.
- This product is classified as class I, requiring an Earth connection, and is IP65 rated for outdoor use.
Please refer to the OPTONICA Outdoor LED Floodlights User Guide for more detailed instructions and safety information.
Add New Comment