User Manual Q&AAnswer
Jan 22, 2025 - 01:25 AM
To reverse the door of your DOMO DO91126 refrigerator, please follow these steps:
1. Before starting, make sure the appliance is unplugged and empty.
2. Remove the top cover by unscrewing the 2 screws located at the back of the cover.
3. Unscrew the upper hinge and lift the door, placing it on a padded surface to prevent scratching.
4. Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it protrudes downwards when the hinge is turned.
5. Move the cover caps from one side to the other.
6. Remove the hinge pin and bottom hinge by unscrewing the screws. Remove the foot from the left side.
7. Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it protrudes upwards when the hinge is turned.
8. Reassemble the lower hinge on the left side of the appliance by refitting the screws and reassemble the foot on the right side.
9. Put the door on the lower hinge and refit the upper hinge. Ensure the door is aligned horizontally and vertically so that the seals are closed on all sides.
10. Put the top cover back and fix it in place with the screws.
Please note that after reversing the door, leave the appliance alone for 8 hours before switching it on. This allows the coolant to settle.
For more detailed instructions and illustrations, please refer to the DOMO DO91126 Refrigerator Instruction Manual.
Add New Comment