User Manual Q&AAnswer
Jan 22, 2025 - 01:23 AM
To replace the blade on the Fein MKAS 355 Metal Cut Off Saw, follow these steps:
1. Ensure that the power tool is disconnected from the power source and that the blade has come to a complete stop.
2. Locate the blade replacement area on the saw. Refer to the manual for a detailed diagram if needed.
3. Use the required tools, such as a wrench or Allen key, to loosen the blade retaining bolt or nut.
4. Remove the old blade from the saw by sliding it off the spindle.
5. Carefully inspect the new blade to ensure it is the correct size and type for your saw and application.
6. Slide the new blade onto the spindle, aligning the mounting hole with the spindle.
7. Tighten the blade retaining bolt or nut securely using the appropriate tool.
8. Double-check that the blade is properly aligned and securely fastened before operating the saw.
Note: It is important to refer to the Fein MKAS 355 Metal Cut Off Saw Instruction Manual for specific instructions and safety precautions related to blade replacement.
Add New Comment