User Manual Q&AAnswer
Jan 22, 2025 - 01:18 AM
Cleaning the Hamilton Beach 35021 Electric Deep Fryer is a simple process. Here are the step-by-step instructions:
1. Make sure the fryer is turned to the MIN setting and unplugged from the wall outlet. Wait until the oil has cooled, which may take several hours.
2. Lift the control panel up and out of the base, being careful not to drip oil on the base. Do not immerse the heating element assembly in water.
3. Lift the oil tank from the fryer and pour out the oil. Wipe off any excess oil or oil film from the oil tank.
4. Clean the outside of the base with hot, soapy water. Do not immerse the unit in water.
5. Press the OPEN button to release and open the lid. Hold the base with one hand and use the other hand to slightly tilt the lid towards the control panel and pull it up.
6. To reinsert the lid, place it on the lid hinge, making sure the silver spring lines up with the opening on the back of the base. Slightly tilt the lid towards the control panel and gently press it down into place.
7. Use a plastic scouring pad or a household degreaser to clean any oil film buildup on the oil tank.
8. To clean the heating element assembly, gently wipe it with a soft cloth dampened with hot, soapy water. Take care not to damage the fryer while cleaning the heating element assembly.
9. Once all the components are clean and dry, reassemble the fryer by placing the oil tank back into the base and sliding the control panel with the heating element into place.
By following these steps, you can easily clean your Hamilton Beach 35021 Electric Deep Fryer and keep it in good condition for future use. For more information, refer to the user guide provided with the product.
Add New Comment