User Manual Q&AAnswer
Jan 22, 2025 - 01:08 AM
To adjust the depth of the tillage when using the GREENCUT GTC220XE Petrol Power Tiller, follow these steps:
1. Locate the depth-adjustment lever on the power tiller. It is usually located near the handles or on the side of the machine.
2. Remove the retaining pin from the depth-adjustment lever.
3. Raise or lower the depth-adjustment lever to the desired working depth. The lever will have multiple holes to choose from, allowing you to adjust the depth.
4. Align the holes in the depth-adjustment lever with the corresponding holes in the bracket.
5. Insert the retaining pin through the holes to secure the depth-adjustment lever in place.
6. The depth regulator lever down position will result in shallower ploughing, while the depth regulator lever up position will result in deeper ploughing.
Note: It is important to adjust the depth of the tillage before starting the engine and to ensure that the safety control levers are in the neutral position. Always refer to the instruction manual for specific details and safety precautions.
For more information and detailed instructions, please refer to the GREENCUT GTC220XE Petrol Power Tiller Instruction Manual.
Add New Comment