User Manual Q&AAnswer
Jan 22, 2025 - 01:07 AM
To change the blades on the YARD FORCE LH-A20BN Cordless 4 In 1 Tool, follow these steps:
1. Ensure that the tool is switched off and the battery pack is removed for safety.
2. Remove the blade cover by holding it firmly and pulling it backward. This will expose the blades.
3. To remove the current blade, hold the machine in one hand and use your thumb and forefinger of the other hand to lever the retainer upwards.
4. Once the retainer is lifted, you can remove the blade by pulling it out.
5. Install the new blade by inserting it into the blade holder until it is securely in place.
6. To reattach the blade cover, align the two lines marked on the cover with the corresponding marks on the tool. Push the cover forward until the retainer fits into a suitable position.
7. Ensure that the blade cover is securely in place before operating the tool.
Note: It is important to always switch off the tool and remove the battery pack before changing the blades. This will prevent any accidental starting and reduce the risk of injury.
Add New Comment