Answer

Jan 22, 2025 - 01:06 AM
To install the CURT Multi Function Socket with Back Up Alarm, please follow the steps below:
Step 1: Locate the factory 7-way attached to the hitch, behind the center of the rear bumper in position T3 as shown in the 'Wiring Location Guide'.
Step 2: Locate the vehicle battery on the driver side under the hood and disconnect the negative battery terminal.
Step 3: Separate the factory socket and the 7-way.
Step 4: Insert the 57101 socket into the factory housing.
Step 5: Mount the bracket to the vehicle and secure the socket.
Step 6: Reinstall all items removed during installation and reconnect the negative battery terminal.
Please note that it is important to follow all the steps to ensure the CURT socket functions properly. Once installed, you can test for proper function by using a test light or connecting a properly wired trailer.
If you need further assistance, you can contact CURT at 1.877.287.8634 or visit their website at CURTMFG.COM for helpful installation tips.
Add New Comment