How do I replace the washing lines on my Brabantia rotary clothes dryer? (brabantia Clothes Washing Line 65 m Instruction Manual)

Answer

manuals.plus

Jan 22, 2025 - 12:57 AM

To replace the washing lines on your Brabantia rotary clothes dryer, please follow the instructions provided in the manual.

1. First, check which line connectors are used for the existing lines. There are two types: connectors A and connectors B. Refer to figure A and B in the manual to identify the connectors used.

2. If the existing lines are fixed with connectors A:
- Start with the innermost washing lines and work from inside to outside.
- Partially open the rotary dryer and cut off the old washing line next to the metal connector using a pair of scissors.
- Cut a piece of the new washing line, about 15 cm longer than the old line.
- Thread the new lines through the rotary dryer.
- Fasten the plastic connector so that there are 2 line ends of 6.5 cm protruding.
- Repeat this process for each washing line, making the new lines 15 cm longer than the old lines.
- Adjust the tension of the washing lines as necessary by adjusting them in the plastic connectors.
- Once all the washing lines are adjusted correctly, fasten the ends of the lines in the plastic connectors and cut off the excess line to about 2 cm.

3. If the existing lines are fixed with connectors B:
- Start with the innermost washing lines and work from inside to outside.
- Partially open the rotary dryer and cut off the old washing line next to the metal connector using a pair of scissors.
- Note that the lines with this type of connectors are fastened to each arm.
- Cut a piece of the new washing line, about 4 times the length of 1 old line and add 23 cm for fixing the new line.
- Thread the new lines through the rotary dryer.
- Fasten the plastic connector so that there are 2 line ends of 6.5 cm protruding.
- Repeat this process for each washing line, except for the outermost line which should be fastened in each arm.
- Adjust the tension of the washing lines as necessary by adjusting them in the plastic connectors.
- Once all the washing lines are adjusted correctly, fasten the ends of the lines in the plastic connectors and cut off the excess line to about 2 cm.

Please note that these instructions are specifically for the Brabantia Replacement Clothes Washing Line, 65 m, and are intended for use with Brabantia rotaries. For the WallFix model, there are separate instructions provided in the manual.