User Manual Q&AAnswer
Jan 22, 2025 - 12:54 AM
To connect your HP DeskJet 2700e printer to Wi-Fi, please follow these steps:
1. Make sure your computer or mobile device is near the printer during setup.
2. Remove all packaging materials, tape, and cardboard from the printer. Close the ink access door.
3. Plug in the printer and turn it on.
4. Install the required HP Smart software from 123.hp.com or your app store on your computer or mobile device.
5. Open the HP Smart software and follow the on-screen instructions to connect the printer to a network.
6. If prompted, select the Wi-Fi network you want to connect to and enter the password.
7. Wait for the printer to connect to the Wi-Fi network. This may take a few minutes.
8. Once the printer is connected, you can proceed with activating HP+ features if desired.
For more detailed instructions and troubleshooting tips, please refer to the Reference Guide provided with your printer. If you encounter any difficulties during the setup process, you can also visit hp.com/support/printer-setup for additional help and resources.
Note: The specific steps may vary slightly depending on your operating system and the version of the HP Smart software you are using.
Add New Comment