User Manual Q&AAnswer
Jan 22, 2025 - 12:45 AM
To install the GEWiSS I-Con Basic Range Electric Vehicle Charging Wallbox, please follow the steps outlined in the installation guide provided by the manufacturer. Here is a general overview of the installation process:
1. Location: Choose a suitable location for the wallbox installation. It should be easily accessible and close to your electric vehicle parking spot. Ensure that there is enough space for the wallbox and that it is protected from direct sunlight, rain, and other environmental factors.
2. Mounting: Mount the wallbox on a sturdy and secure wall using the provided mounting bracket. Make sure the wall is capable of supporting the weight of the wallbox.
3. Electrical Connection: Before starting any electrical work, ensure that the power supply is turned off. Connect the wallbox to the electrical supply according to the local regulations and guidelines. It is recommended to hire a qualified electrician for this step to ensure proper installation and compliance with safety standards.
4. Cable Connection: Connect the charging cable to the wallbox. The wallbox should have a designated socket or connector for the cable. Ensure that the connection is secure and properly aligned.
5. Configuration: Once the physical installation is complete, follow the instructions provided in the user manual to configure the wallbox settings. This may include setting the charging power, configuring user access, and connecting the wallbox to a network if applicable.
6. Testing: After installation and configuration, perform a test to ensure that the wallbox is functioning correctly. Plug in your electric vehicle and verify that it starts charging as expected. Monitor the charging process to ensure everything is working properly.
Please note that the above steps are a general overview and may vary depending on the specific model and local regulations. Always refer to the official installation guide provided by GEWiSS for detailed instructions and safety precautions.
Add New Comment