User Manual Q&AAnswer
Jan 22, 2025 - 12:34 AM
To assemble the BRAYER BR1601 Cheap Meat Grinder, follow these steps:
1. Make sure the unit is unplugged and all removable parts are clean and dry.
2. Insert the meat grinder head (7) into the installation place (4) and press the lock button (3). Turn the meat grinder head counterclockwise until it is fixed.
3. Install the xxxx (8) into the meat grinder head body (7).
4. Install the crossed blade (9) onto the xxxx (8).
5. Choose either the coarse or fine cutting plate (10) and place it over the blade, aligning the ledges on the plate with the grooves on the meat grinder head body. Tighten the nut (11).
6. Attach the food tray (6) onto the meat grinder head (7).
To use the BRAYER BR1601 Cheap Meat Grinder, follow these steps:
1. Make sure the unit is assembled properly and placed on a dry, flat, and stable surface.
2. Ensure that the ventilation openings on the meat grinder body are not blocked.
3. Remove any bones and excess fat from the meat before processing.
4. Place a suitable bowl under the meat grinder head (7) to catch the minced meat.
5. Plug the unit into a power outlet.
6. Set the operation mode switch (1) to the "ON" position.
7. Use the pusher (5) to slowly feed the meat into the mouth of the grinder head (7). Do not use your hands or any other objects to push the meat.
8. If there is an obstruction during operation, switch the meat grinder off by setting the operation mode switch (1) to the "OFF" position. Then, press and hold the switch (1) in the "R" (reverse) position for a few seconds to activate the reverse function and remove the obstruction.
9. After use, switch the meat grinder off, unplug it, and disassemble it for cleaning.
Please refer to the instruction manual for more detailed information on operating the BRAYER BR1601 Cheap Meat Grinder, including safety precautions and cleaning instructions.
Add New Comment