User Manual Q&AAnswer
Jan 22, 2025 - 12:11 AM
To connect your Optoma EX530 DLP Digital Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can access display settings by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. Adjust the projector's focus and keystone settings, if necessary, to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Optoma EX530 DLP Digital Projector. You can find the manual at the following link: [Optoma EX530 DLP Digital Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment