User Manual Q&AAnswer
Jan 22, 2025 - 12:01 AM
To install the Rizoma BS315 Rearview Mirror on your motorcycle, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Before you start, make sure your motorcycle is standing firmly to prevent any accidents or damage.
2. Check the completeness of the kit by referring to the part list in the manual.
3. Ensure that all fasteners are tightened to the appropriate torque specifications before riding.
4. Clean the mirror using only neutral detergent and cold water. Do not use detergent, aggressive products, or abrasive sponges that can damage or scratch the mirror.
5. Start by installing the handlebar cap. Follow the instructions provided in the manual for the specific installation process.
6. Once the handlebar cap is installed, proceed to install the mirror on the handlebar cap. Again, refer to the manual for detailed instructions.
7. If you are installing the mirror on the right-hand side of the handlebar, follow the specific instructions provided in the manual for this installation.
8. Adjust the mirror using the adjustment system designed for maximum versatility. The manual should provide guidance on how to adjust the mirror to your desired position.
9. Repeat the installation process for the other side of the handlebar if you are installing a mirror on both sides.
10. Finally, install the cap as instructed in the manual.
Please note that these instructions are a summary of the installation process. It is essential to refer to the complete user manual for detailed instructions, including any specific precautions or warnings mentioned. If you have any doubts or need further assistance, it is recommended to consult an authorized Rizoma dealer for help.
Add New Comment