User Manual Q&AAnswer
Jan 21, 2025 - 11:35 PM
To assemble the IKEA NEIDEN Bed Frame, please follow these steps:
1. Start by unpacking all the parts and hardware included in the packaging.
2. Lay out all the wooden pieces and identify the headboard, footboard, side rails, and slats.
3. Attach the side rails to the headboard and footboard using the provided screws and an Allen wrench. Make sure to align the holes properly before tightening the screws.
4. Once the side rails are securely attached, insert the slats into the bed frame. The slats should fit into the designated slots on the side rails.
5. If necessary, install the SKORVA center support beam by placing it in the middle of the bed frame and attaching it to the side rails using the provided screws.
6. Double-check all the connections and tighten any loose screws.
7. Place the mattress on top of the slats, and your IKEA NEIDEN Bed Frame is ready to use.
For more detailed instructions and illustrations, please refer to the IKEA NEIDEN Bed Frame User Guide.
Add New Comment