User Manual Q&AAnswer
Jan 21, 2025 - 11:15 PM
To install the LED s light 1000664 Outdoor LED Wall Light, please follow the steps outlined in the installation instructions provided with the product. Here is a general guide:
1. Before starting the installation, make sure you have read and understood all the safety warnings mentioned in the manual.
2. Gather the necessary tools required for installation. The manual should provide a list of tools needed.
3. Ensure the power source is disconnected before beginning the installation to avoid any electrical hazards.
4. Carefully unpack the LED wall light and inspect it for any damage or defects. If you find any, do not proceed with the installation and contact the manufacturer for a replacement.
5. Identify the suitable location for mounting the LED wall light. Ensure it is a secure and stable surface that can support the weight of the light.
6. Mark the mounting holes on the wall according to the dimensions provided in the manual.
7. Use the appropriate tools to drill the holes in the marked locations.
8. Attach the mounting bracket to the wall using screws or other hardware provided with the product. Make sure it is securely fastened.
9. Connect the electrical wires from the power source to the corresponding wires on the LED wall light. Follow the wire diagram provided in the manual for proper connection.
10. Once the wiring is complete, carefully mount the LED wall light onto the mounting bracket.
11. Secure the light in place using the screws or other fasteners provided.
12. Double-check all the connections and ensure they are tight and secure.
13. Restore power to the LED wall light and test its functionality.
14. After installation, clean the outside of the light using a soft, damp cloth. Do not use cleaning solvents or abrasives.
If you encounter any difficulties during the installation process or have further questions, you can visit the manufacturer's website at www.shada.nl/nl/contact for additional support and assistance.
Add New Comment