User Manual Q&AAnswer
Jan 21, 2025 - 11:06 PM
To assemble and install the QAZQA 104299 Vadi HL 45 Black Pendant Light, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Take precaution while assembling the lamp as there may be sharpness at some parts due to the fabrication system of these mesh lamps.
2. Before installing or using the product, carefully study the instruction manual and the mandatory safety instructions provided.
3. The luminaires should only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
4. Maintenance of the luminaires is limited to their surfaces. During maintenance, ensure no moisture comes into contact with any areas of the terminal connections or voltage control parts.
5. Before any installation, maintenance, or repair work, switch off the electrical supply, preferably using a switch in the distribution box.
6. Do not install exterior lighting during rain.
7. Take into account the minimal separation distance from other objects and the required room around the fitting.
8. If in doubt, consult a professional, considering local installation requirements. Some countries may require lighting to be installed only by registered installers.
9. Adequately tighten clamping screws in electrical connections, especially with 12V low voltage conductors.
10. When replacing a halogen lamp, wait for it to cool for a minimum of 5 minutes.
11. Clean the luminaire with a clean, dry cloth or brush, avoiding solvents or abrasives. Ensure no dampness on electrical components.
12. Take into account all available technical information.
13. Pay attention to the symbols when connecting wires: L = Live, N = Neutral, and = Earth.
14. The luminaire is for indoor use only, where direct contact with water is impossible.
15. The luminaire has a specific protection class (l, ll, or Il) indicating whether it requires earthing or is low voltage or double insulated.
16. Maintain the minimum distance from lighted objects as indicated in meters.
17. Use only the specified self-shielded halogen lamp with the luminaire.
18. Strip the wire to the indicated length in millimeters, as different items may require different lengths.
19. Connect using the specified cable, as different items may require different cables.
20. Ensure the type of lamp, maximum size, and wattage indicated in each lighting unit are not exceeded, as different items may require different light sources with different bulb icons.
21. The armature is designed to work only with the indicated voltage, which may vary for different items.
22. The luminaire can be used in combination with a dimmer.
23. Take note of the reference light angle and light space of the luminaire.
24. Dispose of the luminaire at a staging area for electrical waste, as it cannot be disposed of together with normal domestic waste in a standard rubbish can.
For further reference and detailed instructions, please keep the user manual provided with the product.
Add New Comment