User Manual Q&AAnswer
Jan 21, 2025 - 10:41 PM
To install the LeuchtenDirekt 11154-79-01 REED Pendant Light, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Remove the packaging materials and carefully unpack the pendant light.
3. Locate the mounting plate included in the package. This plate will be used to attach the pendant light to the ceiling.
4. Determine the desired location for the pendant light and mark the spot on the ceiling where the mounting plate will be installed. Ensure that the location is suitable for supporting the weight of the pendant light.
5. Use appropriate screws and wall plugs (not included) to secure the mounting plate to the ceiling. Make sure the plate is securely attached.
6. Connect the wires of the pendant light to the corresponding wires in the ceiling. Follow the wiring diagram provided in the instruction manual to ensure correct connections. It is recommended to consult a qualified electrician if you are unsure about the wiring process.
7. Once the wiring is complete, carefully attach the pendant light to the mounting plate. Ensure that it is securely fastened.
8. Turn on the power supply and test the pendant light to ensure it is functioning properly.
Please note that this is a general installation guide. For specific instructions and safety precautions, please refer to the LeuchtenDirekt 11154-79-01 REED Pendant Light Instruction Manual provided with the product
Add New Comment