User Manual Q&AAnswer
Jan 21, 2025 - 10:36 PM
To properly install the Vintage Vibe Power Amp Module onto your own heatsink, please follow these steps:
1. Ensure that you have the necessary tools and equipment for soldering and working with PCBs.
2. Begin by desoldering the amp module wiring harness from the original PCB. Take note of the connections and their locations on the original PCB.
3. Once the amp module wiring harness is desoldered, solder it onto the Vintage Vibe Power Amp Module. Refer to the provided diagrams and molex connector pinout information to ensure the proper connections.
4. If you are installing the VV amp module onto your own heatsink, it is crucial to install the included thermal insulation pads. Place one thermal insulation pad between each transistor case and the heatsink. This helps to prevent any heat transfer and ensures proper thermal management.
By following these steps and using the provided thermal insulation pads, you can safely and effectively install the Vintage Vibe Power Amp Module onto your own heatsink.
Add New Comment