User Manual Q&AAnswer
Jan 21, 2025 - 10:17 PM
To connect the DAEWOO WIS501S Indoor Siren to your alarm system, follow these steps:
1. Register the Indoor Siren in the control panel:
a. Press the "Connection" button on the siren. The siren will beep once, and the LEDs will light up, indicating that the siren is in Connection Mode for 20 seconds.
b. Press the "Home" or "Arm" button on the control panel of your alarm system.
Note: Do not trigger an alarm with a sensor when registering the siren in the control panel. If you have set a delay on your control panel, temporarily remove the delay before installing your siren.
2. Test the connection:
Press the "Arm" button on the control panel. Both the built-in siren of the control panel and the Indoor Siren will activate.
If you have any issues with the connection, please refer to the troubleshooting section of the user manual or contact the manufacturer's customer support for further assistance.
Add New Comment