User Manual Q&AAnswer
Jan 21, 2025 - 10:07 PM
To install the Lindby E14 Hanglamp, please follow these steps:
1. Unpack the product carefully and check that it is complete and intact. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address mentioned in the manual if there is any damage.
2. Make sure to comply with the national installation and safety regulations for the installation, operation, and maintenance of the light. Always follow the general safety instructions and warnings provided in the manual.
3. The installation sketch on page 9 of the manual provides important information regarding the intended use and installation of the light. Pay attention to the smallest distance to illuminated areas, as well as the suitability of the light for installation on non-combustible surfaces.
4. It is recommended to have a trained electrician connect the electricity supply. Never work on the light if a voltage is applied, as there is a risk of electric shock.
5. Ensure that the light is not exposed to large mechanical loads or stresses, heavy soiling, or changes and modifications. Any use other than the intended use described in the manual can damage the product and pose hazards such as short-circuits, electric shock, or fire.
6. Before starting any cleaning or maintenance work, make sure the light is cooled and disconnected from the power supply. Check that no voltage is present. For regular cleaning, use a dry or lightly moistened cloth. Do not use chemicals or abrasive cleaner/scouring agent.
For further information or specific details, please refer to the Lindby E14 Hanglamp Instruction Manual provided with the product.
Add New Comment