How do I install the Lindby E27 Ceiling Light? (Lindby E27 Ceiling Light Instruction Manual)

Answer

manuals.plus

Jan 21, 2025 - 10:06 PM

To install the Lindby E27 Ceiling Light, please follow these steps:

1. Unpack the product carefully and check that it is complete and intact. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.

2. Ensure that you comply with the national installation and safety regulations for the installation, operation, and maintenance of the light.

3. Before starting the installation, make sure that no voltage is applied to the light. Working on the light while it is energized can be dangerous and may result in electric shock.

4. The installation sketch provided on page 9 of the manual shows the smallest distance to illuminated areas. Make sure to follow these guidelines.

5. The Lindby E27 Ceiling Light is not suitable for covering with thermal insulation materials. It should also not be directly installed on normally flammable surfaces, but only on non-combustible surfaces.

6. If you do not have technical knowledge corresponding to that of a person who has successfully completed training in the electrical trade, it is recommended to have a trained electrician connect the electricity supply.

7. Do not attempt to replace the light sources yourself. This should be done by a professional.

8. Once the light is installed, ensure that it is cooled and disconnected from the power supply before carrying out any cleaning or maintenance work. Use a dry or lightly moistened cloth for regular cleaning and avoid using chemicals or abrasive cleaners.

Please note that this answer is a summary of the installation instructions provided in the Lindby E27 Ceiling Light manual. For more detailed and specific instructions, refer to the manual itself.