User Manual Q&AAnswer
Jan 21, 2025 - 09:54 PM
To initialize the Dahua HDBW1430DE-SW Dome Network Camera, follow these steps:
1. Double-click on the ConfigTool.exe tool to open it.
2. Click on "Modify IP."
3. Click on "Search Setting."
4. Select the searching way:
- Current Segment Search: Select the checkbox and enter the username and password. The system will search devices accordingly.
- Other Segment Search: Select the checkbox and enter the start and end IP addresses. Enter the username and password. The system will search for devices accordingly.
- You can select both checkboxes to search for devices under both conditions.
5. Enter your username and password.
6. Click "OK."
7. Select the uninitialized devices you want to initialize.
8. Click "Initialize."
9. Set and confirm the password for the devices, enter a valid email address, and click "Next."
10. Select "Easy4ip" or "Auto-check for updates" according to your needs.
11. Click "OK" to initialize the device.
12. Click "Finish."
Please note that these instructions are based on the provided manual and may vary slightly depending on the specific model and firmware version. For more detailed information, refer to the official user manual or contact Dahua customer service.
Add New Comment