How do I access the EdgeOS Configuration Interface for the EdgeMAX ER-4 Edge Router? (EdgeMAX ER-4 Edge Router User Guide)

Answer

manuals.plus

Jan 21, 2025 - 09:44 PM


To access the EdgeOS Configuration Interface for the EdgeMAX ER-4 Edge Router, you can follow these steps:

1. Connect your computer to the EdgeRouter using an Ethernet cable. Plug one end of the cable into the Ethernet port on your computer and the other end into the port labeled "eth0" on the EdgeRouter.

2. Make sure your computer's Ethernet adapter is configured with a static IP address on the 192.168.1.x subnet. This can be done through the network settings of your operating system.

3. Launch a web browser on your computer.

4. Enter the appropriate IP address in the address field of the web browser. There are two ways to determine the IP address:

   - If your EdgeRouter is set up as a DHCP client, you can check the DHCP server to see which IP address was assigned to the EdgeRouter based on its MAC address (which can be found on the label of the device).
   
   - Alternatively, you can let the EdgeRouter obtain an IP address and then check your computer's network settings to see the IP address assigned to the EdgeRouter.

5. Once you have entered the IP address in the web browser, press Enter or click Go. This will open the EdgeOS Configuration Interface.

You can now customize your settings as needed using the EdgeOS Configuration Interface. For more detailed information and instructions, you can refer to the EdgeOS User Guide, which is available for download at ui.com/download/edgemax.