User Manual Q&AAnswer
Jan 21, 2025 - 09:41 PM
To select and adjust the built-in programs on the LEDJ95 Spectra Batten, follow these steps:
1. After the power is switched on, press the "MODE" button to activate the main menu.
2. Use the "SETUP" button to change the parameter of the current mode.
3. Use the "UP" button to increase the value of the current setting and the "DOWN" button to decrease the value.
4. To access the built-in programs mode, select "Built-in programs" from the main menu.
5. Press the "SETUP" button, and the LCD display will show the current program (from PG00 to PG12).
6. Use the "UP" and "DOWN" buttons to select the desired program value.
7. When the LCD display shows PG- - (except PG00), press the "SETUP" button for the first time.
8. The display will show SP.99, allowing you to select the running speed using the "UP" and "DOWN" buttons.
9. Press the "SETUP" button for the second time, and it will show FS.00, allowing you to select the flash frequency using the "UP" and "DOWN" buttons.
10. For PG.00, press the "SETUP" button for the first time, and it will show C-.-1. Use the "UP" and "DOWN" buttons to select the static color.
11. Press the "SETUP" button for a second time, and it will show FS.00. Use the "UP" and "DOWN" buttons to set the flash frequency. Note that there is no speed function in this mode.
12. For PG05, press the "SETUP" button first, and it will show C-.-1. Use the "UP" and "DOWN" buttons to select the moving color.
13. For PG06, press the "SETUP" button for the first time, and it will show C1.-1. Use the "UP" and "DOWN" buttons to select the background color. Press the "SETUP" button for the second time, and it will show C2.-1. Use the "UP" and "DOWN" buttons to select the moving color.
Remember to refer to the user manual for more detailed instructions and safety precautions.
Add New Comment