How do I install the ARCCHIO GU10 Reflector LED Bulb? (ARCCHIO GU10 Reflector LED Bulb Instruction Manual)

Answer

manuals.plus

Jan 21, 2025 - 09:29 PM


To install the ARCCHIO GU10 Reflector LED Bulb, please follow these steps:

1. Before starting, ensure that the power supply is turned off and the light switch is in the off position.

2. Carefully unpack the product and check for any damage. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.

3. Make sure you have the necessary technical knowledge or consult a trained electrician for the installation. The electricity supply should only be connected by a trained electrician.

4. Determine the appropriate location for the light installation. Refer to the installation sketch provided on page 9 of the manual for guidance on the smallest distance to illuminated areas.

5. Ensure that the installation surface is non-combustible and suitable for the light. The lights are not suitable for direct installation on normally flammable surfaces.

6. Once you have chosen the installation location, carefully insert the ARCCHIO GU10 Reflector LED Bulb into the appropriate socket or fixture. Make sure it is securely fitted.

7. After installation, double-check that the power supply is still turned off before turning it back on.

Please note that this is a general guide for installation. For specific instructions and safety precautions, it is essential to refer to the complete instruction manual provided with the product.