User Manual Q&AAnswer
Jan 21, 2025 - 09:28 PM
Installation of the LUCIDE 79185 Unar Flush Ceiling Light should be done by a qualified electrician to ensure safety and proper functioning. Please follow the instructions below for a safe installation:
1. Before starting the installation, make sure to isolate the power by turning off the electricity to the area where the light will be installed.
2. Ensure that the location where the light will be installed is suitable for indoor use. The LUCIDE 79185 Unar Flush Ceiling Light is not suitable for outdoor or bathroom use unless it has a higher IP degree specifically designed for such installations.
3. Avoid installing the light in humid places or in direct contact with water, liquids, or inflammable products. Also, maintain the minimum distance indicated on the light fixture from any inflammable objects.
4. During installation, take care to prevent the cables from being squeezed or damaged by sharp edges. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician.
5. Allow the light fixture and bulbs to cool down before touching them, as they can become very hot during operation. Always use the correct bulb type and wattage as indicated on the product.
For further assistance or if you have any doubts, it is recommended to consult a qualified electrician.
Please refer to the provided manual for more detailed information and safety instructions.
Add New Comment