User Manual Q&AAnswer
Jan 21, 2025 - 09:23 PM
To install the Lucande 7VPw22JNY2ry LED Outdoor Wall Lamp, please follow the instructions provided in the manual carefully. Here is a step-by-step guide:
1. Unpack the product and ensure that it is complete and undamaged. Do not use the lamp if there is any damage to the cable, glass, or electrical parts. In such cases, contact the service address mentioned in the manual.
2. Familiarize yourself with the health and safety regulations mentioned in the manual. Comply with the national installation and safety regulations for the installation, operation, and maintenance of the lamp.
3. Before starting the installation, make sure that no voltage is applied to the lamp. Working on the lamp with a voltage applied can be dangerous and may result in electric shock or death.
4. The installation sketch provided in the manual will guide you on the precise installation requirements. Pay attention to the smallest distance to illuminated areas and ensure that the lamp is not installed on normally flammable surfaces.
5. If you do not have technical knowledge corresponding to that of a person who has successfully completed training in the electrical trade, it is recommended to have a trained electrician connect the electricity supply.
6. Regularly clean the lamp using a dry or lightly moistened cloth. Do not use chemicals or abrasive cleaners/scouring agents.
7. When disposing of the lamp, do not throw it in normal household waste. Instead, hand it in to a collection point for the recycling of large electrical and electronic appliances. Follow the relevant provisions regarding the separate collection of waste electrical and electronic equipment (WEEE) in your country.
For any further questions or concerns, you can contact the service address provided in the manual: LUQOM GmbH, Seelbüde 13, D-36110 Schlitz, or reach out to them via email at info@luqom.eu.
Add New Comment