User Manual Q&AAnswer
Jan 21, 2025 - 09:22 PM
Sure! Here are the installation instructions for the Veradek Pure Series Railing Planter:
1. Start by gathering all the parts included in the box. These should include the planter itself, brackets, screws, and any additional hardware.
2. Before installation, make sure your railing is suitable for the planter. The planter is designed to fit railings with a width of up to 2.5 inches. Measure your railing to ensure it meets this requirement.
3. Position the planter on the railing where you want it to be installed. Make sure it is centered and aligned properly.
4. Take one of the brackets and place it on the inside of the planter, aligning it with the pre-drilled holes. The bracket should be positioned so that it rests against the railing.
5. Using the screws provided, secure the bracket to the planter by screwing them into the pre-drilled holes. Repeat this step for the remaining brackets, ensuring they are evenly spaced along the length of the planter.
6. Once all the brackets are securely attached to the planter, position the planter on the railing again, this time with the brackets resting on the top of the railing.
7. Use the screws provided to attach the brackets to the railing. Make sure to xxxx them in tightly to ensure stability.
8. Double-check that the planter is securely attached to the railing and adjust if necessary.
9. Finally, fill the planter with your desired plants or flowers, making sure to provide proper drainage.
Congratulations! You have successfully installed the Veradek Pure Series Railing Planter. Enjoy your beautiful plants and the durability of the planter in any weather conditions. If you have any further questions or need assistance, feel free to contact Veradek Outdoor at info@veradek.com.
Add New Comment