User Manual Q&AAnswer
Jan 21, 2025 - 08:24 PM
To select the proper constriction ring for the Medintim mes1L Erection System, it is important to find a balance between a ring that is not too tight and one that is not too loose. If the constriction ring is too tight, it may cause pain, and if it is too loose, your xxxx may not remain stiff for long.
Here is a step-by-step guide to help you determine the correct size:
1. Start with the largest constriction ring (20 mm) included in the kit.
2. Slide the constriction ring over the cone onto the small ring loader.
3. Place the erection aid on your xxxx and pump air out of the cylinder using the pump head.
4. Push the constriction ring from the ring loader onto your stiff xxxx .
5. Slide the constriction ring quickly and as far as possible down to the base of the xxxx .
6. If the constriction ring feels too tight or causes pain, remove it and try a larger size.
7. If the constriction ring is too loose and your xxxx does not remain stiff, try a smaller size.
8. Repeat steps 3-7 with different sizes of constriction rings until you find the right size for yourself.
The erection aid includes two ring loaders, a larger one and a smaller one. If the smaller ring loader is too narrow, you can use the larger one. The two ring loaders are suitable for all constriction ring sizes. If both ring loaders are too narrow, you can slip the constriction ring directly onto the cylinder.
It is important to note that from time to time, the constriction rings may need to be replaced. You can purchase replacement constriction rings from your dealer.
For further assistance or if you are unsure about using the erection aid for your health, it is recommended to consult with your doctor or healthcare professional.
Add New Comment