ow do I install the ProClip 713267 Charging Cradle with USB-A Host Port? (ProClip 713267 Charging Cradle USB-A Instruction Guide)

Answer

manuals.plus

Jan 21, 2025 - 05:55 AM


To install the ProClip 713267 Charging Cradle with USB-A Host Port, follow these steps:

1. Power and USB Cabling:
   - Plug in the power and USB-A cables.
   - Place the retention clip with brass inserts over the top of the cables and use the included fasteners to secure the clip.
   - Use the included zip ties and the holes in the steel base plate to manage and secure the cables.

2. Mounting the Cradle:
   - The cradle features the AMPS and VESA75 hole pattern in the steel base plate.
   - Use the included M4 Fastener pack to attach the cradle to your chosen mount. The pack includes various lengths of fasteners, washers, lock nuts, and a 2.5mm Allen wrench.

3. Docking:
   - Place the lower part of your device in the cradle.
   - Press the top middle of the device so it snaps into place under the top arm of the cradle.

4. Undocking:
   - Press upwards on the upper part of the cradle.
   - Simultaneously pull the upper part of the device out from the cradle.
   - Lift the device up and out from the cradle.

Please note that these instructions are a summary and it is important to carefully read all instructions and review the images provided in the manual before installing the product. Additionally, ensure that you have the necessary knowledge, skills, and physical ability to perform the installation. ProClip USA, Inc. shall have no liability for any damage or injury resulting from the installation or use of the product.